Model Source Files for e-NABLE Hands

For R&D discussions that don't fit elsewhere.
Ken Bice
Posts: 3
Joined: Sun Mar 19, 2017 4:07 am

Model Source Files for e-NABLE Hands

Postby Ken Bice » Tue Oct 31, 2017 8:00 pm

I have been collecting links to source files for as many e-NABLE devices as I can. I had posted my Google spreadsheet on the e-NABLE R&D Collaborations Facebook page, and had significant contributions, especially from Michael Howland and Jacquin Buchanan. I then also had Erick Nateras fill in new tabs with other, non- e-NABLE devices.
Here's the current (and updateable) spreadsheet:
https://docs.google.com/spreadsheets/d/1ja55ZhMB2VKwp30_KeqVHBRrT5j7qHhAU2ns8HUYixc/edit#gid=0.

There was a good discussion of source files and complexity with providing them by Jacquin Buchanan. You can find the Google+ posting here:
https://plus.google.com/110761654046073065754/posts/bNPpHq8QeNt.
You will see that Peter Binkley noted that his designs only exist in .Blend format.
I have also contacted Steve Wood (Gyrobot) who indicates he uses MeshMixer to create the STL files directly.

So there may not be a good way to gather all source files. Meanwhile, I will try to update the referenced spreadsheet as I find any more design source files, and when/if any new designs are made available.

Return to “General R&D”

Who is online

Users browsing this forum: No registered users and 1 guest