Print-in-place fingers make a lot of sense because they eliminate a lot of assembly, parts, and in this case, knots and elastics, some of our greatest pain points. What's most exciting is that with parametric design, we can keep the termination geometry (which is high-tolerance with respect to the monofilament diameter) and the clearances between joint faces constant while varying the rest of the geometry. See for some promising results, which I will be posting about in more detail shortly. The other interesting thing is that the "negative space" of this joint (plus the cable-routing and termination geometry) can be booleaned out of many other geometries, making this extensible to more organically modeled geometries as well.
The next step is to build the drive-able parametric model for a three phalange push/pull finger and to determine proper clearances for different machines. This dovetails nicely into another high priority project, so I hope to have some more results soon.
, terminus cover clip . For reference, the trimmer line monofilament is 0.053in/1.34mm in diameter, but this can be easily changed.
- 1.JPG (277.45 KiB) Viewed 3714 times
- 2.jpg (378.81 KiB) Viewed 3714 times
- 3.JPG (332.92 KiB) Viewed 3714 times
- Flexion via nylon monofilament
- 4.jpg (329.04 KiB) Viewed 3714 times
- Extension via nylon monofilament
- 5.jpg (328.85 KiB) Viewed 3714 times
- Summary of know-free cable termination approach in distal phalange
- 6.JPG (368.01 KiB) Viewed 3714 times
- Installing maintenance cover
- 7.jpg (295.95 KiB) Viewed 3714 times
- Maintenance cover installed
- 8.jpg (316.17 KiB) Viewed 3714 times
- The print-in-place joinery can be used at very small scales when the clearances are maintained parametrically
- 9.jpg (324.68 KiB) Viewed 3714 times
- 10.jpg (457.73 KiB) Viewed 3714 times
- Detail of internal features
- Screenshot 2015-08-09 09.50.10.png (123.93 KiB) Viewed 3714 times
- More detail on internal features
- Screenshot 2015-08-09 09.50.19.png (157.71 KiB) Viewed 3714 times
- Screenshot 2015-08-09 09.52.07.png (138.96 KiB) Viewed 3714 times